| END CONNECTION DESIGN | ELBOW FIRST END |
| END CONNECTION DESIGN | ELBOW SECOND END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 160.0 |
| BURST TEST PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | SWIVEL NUT, FLARELESS FIRST END |
| CONNECTION STYLE | SWIVEL NUT, FLARELESS SECOND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE SECOND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLOW ANGLE | 45.0 DEGREES FIRST END |
| FLOW ANGLE | 90.0 DEGREES SECOND END |
| HYDROSTATIC TEST PRESSURE | 2500.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.438 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | ROUGH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| OUTSIDE DIAMETER | 0.641 INCHES NOMINAL |
| MEASURING METHOD AND LENGTH | 15.000 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 3.500 INCHES |
| NOMINAL THREAD SIZE | 0.750 INCHES FIRST END |
| NOMINAL THREAD SIZE | 0.750 INCHES SECOND END |
| SEAT ANGLE | 12.0 DEGREES SECOND END |
| SEAT ANGLE | 12.0 DEGREES FIRST END |
| TEMP RATING | -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B FIRST END |
| THREAD CLASS | 3B SECOND END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD DIRECTION | RIGHT-HAND SECOND END |
| THREAD SERIES DESIGNATOR | UNF FIRST END |
| THREAD SERIES DESIGNATOR | UNF SECOND END |
| THREAD QUANTITY PER INCH | 18 FIRST END |
| THREAD QUANTITY PER INCH | 18 SECOND END |