| CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| PLAIN FACE FLANGE 2ND END |
| MEASURING METHOD AND LENGTH | 42.500 INCHES NOMINAL WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND |
| 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 16000.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND |
| LIGHT RESISTANT AND |
| OIL RESISTANT AND |
| WEATHERPROOF |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED FIBER AND |
| 2ND LAYER SPIRALLY WRAPPED STEEL FABRIC AND |
| 3RD LAYER SPIRALLY WRAPPED STEEL FABRIC AND |
| 4TH LAYER SPIRALLY WRAPPED STEEL FABRIC AND |
| 5TH LAYER SPIRALLY WRAPPED STEEL FABRIC AND |
| OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| FLANGE THICKNESS | 0.320 INCHES NOMINAL 1ST END |
| 0.320 INCHES NOMINAL 2ND END |
| INSIDE DIAMETER | 1.000 INCHES NOMINAL |
| OUTSIDE DIAMETER | 1.750 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM 1ST END |
| CONNECTION STYLE | PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 1ST END |
| PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 2ND END |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| SOLID 2ND END |
| FLANGE STYLE | ROUND W/ OUT BOLT HOLES 1ST END |
| ROUND W/ OUT BOLT HOLES 2ND END |
| FLANGE OUTSIDE DIAMETER | 2.000 INCHES NOMINAL 1ST END |
| 1.750 INCHES NOMINAL 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| ELBOW 2ND END |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, CHLOROPRENE; TWO CLAMP-TYPE COUPLINGS |