| END CONNECTION DESIGN | ELBOW SECOND END |
| END CONNECTION DESIGN | STRAIGHT FIRST END |
| BURST TEST PRESSURE | 6500.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | SWIVEL NUT FLARE FIRST END |
| CONNECTION STYLE | SWIVEL NUT FLARE SECOND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE SECOND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY AND NUTS DRILLED FOR LOCKWIRE |
| FLOW ANGLE | 45.0 DEGREES SECOND END |
| HYDROSTATIC TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.298 INCHES MINIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND CORROSION RESISTANT |
| OUTSIDE DIAMETER | 0.469 INCHES MAXIMUM |
| MEASURING METHOD AND LENGTH | 16.000 INCHES NOMINAL WORKING |
| MINIMUM INSIDE BENDING RADIUS | 4.000 INCHES |
| NOMINAL THREAD SIZE | 0.562 INCHES FIRST END |
| NOMINAL THREAD SIZE | 0.562 INCHES SECOND END |
| SEAT ANGLE | 37.0 DEGREES SECOND END |
| SEAT ANGLE | 37.0 DEGREES FIRST END |
| SPECIFICATION/STANDARD DATA | 07482-J263D0160AB MANUFACTURERS SOURCE CONTROL |
| TEMP RATING | -65.0 FAHRENHEIT AND 450.0 FAHRENHEIT SINGLE RESPONSE |
| TEST DATA DOCUMENT | 07482-J263 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| THREAD CLASS | 3B FIRST END |
| THREAD CLASS | 3B SECOND END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD DIRECTION | RIGHT-HAND SECOND END |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) FIRST END |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) SECOND END |