| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 20.000 INCHES NOMINAL EXCLUDING END FITTINGS |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND |
| 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH |
| VACUUM IN TORR | 50.8 |
| OUTER COVERING ENVIRONMENTAL PROTECTION | FUEL RESISTANT AND |
| OIL RESISTANT AND |
| WATER RESISTANT |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED TEXTILE YARN AND |
| 2ND LAYER BRAIDED WIRE AND |
| 3RD LAYER BRAIDED TEXTILE YARN AND |
| OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| MINIMUM INSIDE BENDING RADIUS | 4.620 INCHES |
| INSIDE DIAMETER | 0.410 INCHES NOMINAL |
| OUTSIDE DIAMETER | 0.770 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| SEAT ANGLE | 37.0 DEGREES AND |
| 45.0 DEGREES 1ST END |
| END CONNECTION DESIGN | ELBOW 1ST END |
| FLOW ANGLE | 90.0 DEGREES 1ST END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
| THREAD CLASS | 2B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |