| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| THREADED INTERNAL TUBE 2ND END |
| MEASURING METHOD AND LENGTH | 7.000 INCHES NOMINAL WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND |
| 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| VACUUM IN TORR | 254.0 |
| OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| MINIMUM INSIDE BENDING RADIUS | 6.500 INCHES |
| INSIDE DIAMETER | 0.625 INCHES NOMINAL |
| OUTSIDE DIAMETER | 0.789 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| SWIVEL NUT FLARE 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| 37.0 DEGREES 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| ELBOW 2ND END |
| FLOW ANGLE | 45.0 DEGREES 2ND END |
| THREAD SERIES DESIGNATOR | UNJ 1ST END |
| UNJ 2ND END |
| NOMINAL THREAD SIZE | 1.062 INCHES 1ST END |
| 1.062 INCHES 2ND END |
| THREAD QUANTITY PER INCH | 12 1ST END |
| 12 2ND END |
| THREAD CLASS | 3B 1ST END |
| 3B 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| RIGHT-HAND 2ND END |
| FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| SUPPLEMENTARY FEATURES | THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURRENT APPROVED SOURCE, 81349, HAS INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984. THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |
| SPECIFICATION/STANDARD DATA | 81349-MIL-H-25579 GOVERNMENT SPECIFICATION |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 81349 |
| NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | MILH25579-12 |