| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 9.100 INCHES NOMINAL WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND |
| 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 9000.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| MINIMUM INSIDE BENDING RADIUS | 4.000 INCHES |
| INSIDE DIAMETER | 0.312 INCHES NOMINAL |
| OUTSIDE DIAMETER | 0.438 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| END FITTING COMPONENT AND MATERIAL | NUT STEEL CORROSION RESISTING ALL ENDS |
| FITTING COMPONENT AND SURFACE TREATMENT | NUT PASSIVATE ALL ENDS |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| NOMINAL THREAD SIZE | 0.562 INCHES 1ST END |
| THREAD QUANTITY PER INCH | 18 1ST END |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| SPECIFICATION/STANDARD DATA | MIL MS27053 NATIONAL STD/SPEC |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC, POLYTETRAFLUOROETHYLENE |
| SPEC/STD CONTROLLING DATA | |
| MANUFACTURERS CODE | 07482 |
| MFR SOURCE CONTROLLING REFERENCE | R462E0091A |