| CONNECTION TYPE | RECESSED FLANGE 1ST END |
| PLAIN FACE FLANGE 2ND END |
| MEASURING METHOD AND LENGTH | 18.000 INCHES NOMINAL OVERALL |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND |
| 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| EXTERIOR COLOR | NATURAL |
| OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND |
| OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| MINIMUM INSIDE BENDING RADIUS | 14.000 INCHES |
| FLANGE THICKNESS | 0.300 INCHES NOMINAL 1ST END |
| 0.300 INCHES NOMINAL 2ND END |
| INSIDE DIAMETER | 1.344 INCHES MINIMUM AND |
| 1.406 INCHES MAXIMUM |
| OUTSIDE DIAMETER | 1.633 INCHES MINIMUM AND |
| 1.711 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| CONNECTION STYLE | RECESSED 1ST END |
| PLAIN SWIVEL 2ND END |
| RECESS DIAMETER | 1.100 INCHES NOMINAL 1ST END |
| RECESS DEPTH | 0.118 INCHES NOMINAL 1ST END |
| END FLANGE CONSTRUCTION | SOLID 1ST END |
| SOLID 2ND END |
| FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) 1ST END |
| RECTANGULAR (INCLUDES SQUARE) 2ND END |
| BOLT HOLE DIAMETER | 0.270 INCHES NOMINAL 1ST END |
| 0.250 INCHES NOMINAL 2ND END |
| FLANGE LENGTH | 2.230 INCHES NOMINAL 1ST END |
| 1.770 INCHES NOMINAL 2ND END |
| FLANGE WIDTH | 2.230 INCHES NOMINAL 1ST END |
| 1.770 INCHES NOMINAL 2ND END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.650 INCHES NOMINAL 1ST END |
| 1.306 INCHES NOMINAL 2ND END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.650 INCHES NOMINAL 1ST END |
| 1.306 INCHES NOMINAL 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| ELBOW 2ND END |
| FLOW ANGLE | 90.0 DEGREES 2ND END |
| SUPPLEMENTARY FEATURES | THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL;THE CURRENT APPROVED SOURCES; 50599 HAVE INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984,THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |
| BOLT HOLE QUANTITY | 4 1ST END |
| 4 2ND END |