| END INSIDE DIAMETER | 0.844 INCHES MINIMUM AND 0.875 INCHES MAXIMUM SECOND END |
| CONNECTION STYLE | ROUND SECOND END |
| CONNECTION TYPE | COUPLING FIRST END |
| CONNECTION TYPE | SOFT SECOND END |
| COUPLING STYLE | CONNECTOR, OXYGEN HOSE TO REGULATOR (NOTE: APPLICABLE TO HOSE ASSEMBLY, AIR BREATHING ONLY.) SECOND END |
| COUPLING STYLE | OXYGEN HOSE CLAMP FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| END OVERALL LENGTH | 0.938 INCHES MINIMUM AND 1.062 INCHES MAXIMUM SECOND END |
| HOSE WEIGHT | 5.000 OUNCES PER LINEAR FOOT |
| INSIDE DIAMETER | 0.750 INCHES NOMINAL FIRST END |
| OPERATING PRESSURE | 20.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM |
| OUTSIDE DIAMETER | 1.094 INCHES MINIMUM AND 1.250 INCHES MAXIMUM BOTH ENDS |
| MATERIAL DOCUMENT AND CLASSIFICATION | MS22058-2 MIL SPEC ALL MATERIAL RESPONSES FIRST END COUPLING |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-W-423,FORM 1,COMP 302,COND 3 FED SPEC SINGLE MATERIAL RESPONSE REINFORCING WIRE |
| MATERIAL | COPPER ALLOY SECOND END COUPLING |
| MATERIAL | COTTON AND FIBERGLASS FIRST PLY |
| MATERIAL | PLASTIC POLYAMIDE NYLON SECOND PLY |
| MATERIAL | STEEL AND COPPER ALLOY AND ALUMINUM FIRST END COUPLING |
| MATERIAL | STEEL CORROSION RESISTING REINFORCING WIRE |
| MEASURING METHOD AND LENGTH | 12.000 INCHES NOMINAL OVERALL |
| WALL THICKNESS | 0.250 INCHES NOMINAL |
| STYLE DESIGNATOR | FULLY CONVOLUTED W/ WIRE RINGS BETWEEN CONVOLUTIONS |
| SURFACE TREATMENT | CADMIUM FIRST END COUPLING |