| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| THREADED EXTERNAL PIPE 2ND END |
| MEDIA FOR WHICH DESIGNED | AIR AND |
| HYDRAULIC FLUID AND |
| FUEL/OIL, HYDROCARBON AND |
| WATER SINGLE RESPONSE |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND |
| 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| VACUUM IN TORR | 50.8 |
| EXTERIOR COLOR | BLACK |
| OUTER COVERING ENVIRONMENTAL PROTECTION | COLD RESISTANT AND |
| OIL RESISTANT |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED TEXTILE YARN |
| MINIMUM INSIDE BENDING RADIUS | 3.000 INCHES |
| INSIDE DIAMETER | 0.190 INCHES NOMINAL |
| OUTSIDE DIAMETER | 0.520 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| INVERTED FLARE 2ND END |
| SEAT ANGLE | 45.0 DEGREES 1ST END |
| 30.0 DEGREES 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| STRAIGHT 2ND END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| NPTF 2ND END |
| NOMINAL THREAD SIZE | 0.438 INCHES 1ST END |
| 0.250 INCHES 2ND END |
| THREAD CLASS | 2B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| RIGHT-HAND 2ND END |
| FEATURES PROVIDED | REUSABLE END FITTINGS |
| SPECIFICATION/STANDARD DATA | SAE J517,100R5-81343 NATIONAL STD/SPEC |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |