| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID, PHOSPHATE-ESTER BASE AND |
| HYDRAULIC FLUID, SILICATE-ESTER BASE SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 50.000 INCHES NOMINAL WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND |
| 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED STEEL WIRE AND |
| 2ND LAYER SHEET RUBBER AND |
| 3RD LAYER BRAIDED STEEL WIRE AND |
| 4TH LAYER SHEET RUBBER AND |
| 5TH LAYER MOLDED RUBBER, SYNTHETIC AND |
| OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD |
| INSIDE DIAMETER | 0.562 INCHES NOMINAL |
| OUTSIDE DIAMETER | 1.031 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| END FITTING COMPONENT AND MATERIAL | NIPPLE STEEL ALL ENDS |
| NUT STEEL 1ST END |
| SOCKET ALUMINUM ALLOY 2ND END |
| FITTING COMPONENT AND SURFACE TREATMENT | NIPPLE CADMIUM ALL ENDS |
| NUT CADMIUM 1ST END |
| SOCKET ANODIZE 2ND END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| NOMINAL THREAD SIZE | 0.875 INCHES 1ST END |
| THREAD CLASS | 3B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| SPECIAL MARKINGS | LIGHT BLUE W/YELLOW MARKINGS IDENTIFICATION TAPE,MARKED W/LETTERS/EXP/AND ARROW TO INDICATE FLOW DIRECTION |
| SPECIFICATION/STANDARD DATA | MIL MS28760-10 NATIONAL STD/SPEC |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC; DESIGNED FOR EXTENDED PRESURE CONTROL SYSTEM OF AERIAL REFUELING BOOM |