| CONNECTION TYPE | THREADED EXTERNAL TUBE 1ST END |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 55.000 INCHES NOMINAL OVERALL |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -40.0 DEG FAHRENHEIT AND |
| 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 10000.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 20000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 40000.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND |
| WEATHERPROOF |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID STEEL WIRE AND |
| 2ND LAYER SPIRALLY LAID STEEL WIRE AND |
| 3RD LAYER SPIRALLY LAID STEEL WIRE AND |
| 4TH LAYER SPIRALLY LAID STEEL WIRE AND |
| 5TH LAYER SPIRALLY LAID STEEL WIRE AND |
| 6TH LAYER SPIRALLY LAID STEEL WIRE AND |
| OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| MINIMUM INSIDE BENDING RADIUS | 6.000 INCHES |
| INSIDE DIAMETER | 0.375 INCHES NOMINAL |
| OUTSIDE DIAMETER | 1.094 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| END FITTING COMPONENT AND MATERIAL | NIPPLE STEEL ALL ENDS |
| NUT STEEL 1ST END |
| SOCKET STEEL CORROSION RESISTING 2ND END |
| CONNECTION STYLE | INVERTED FLARE 1ST END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| NOMINAL THREAD SIZE | 0.375 INCHES 1ST END |
| THREAD CLASS | 2A 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| SPECIFICATION/STANDARD DATA | SAE J517,100R11-81343 NATIONAL STD/SPEC |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |