| END CONNECTION DESIGN | STRAIGHT FIRST END |
| END CONNECTION DESIGN | STRAIGHT SECOND END |
| END FLANGE CONSTRUCTION | SOLID SECOND END |
| BOLT HOLE DIAMETER | 0.344 INCHES NOMINAL SECOND END |
| BOLT CIRCLE DIAMETER | 2.312 INCHES NOMINAL SECOND END |
| BOLT HOLE QUANTITY | 3 SECOND END |
| BURST TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | RAISED SWIVEL SECOND END |
| CONNECTION STYLE | SWIVEL NUT FLARE FIRST END |
| CONNECTION TYPE | RAISED FACE FLANGE SECOND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | BLACK |
| FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY AND REUSABLE END FITTINGS |
| FLANGE LENGTH | 3.000 INCHES NOMINAL SECOND END |
| FLANGE THICKNESS | 0.312 INCHES NOMINAL SECOND END |
| FLANGE STYLE | TRIANGULAR SECOND END |
| FLANGE WIDTH | 3.000 INCHES NOMINAL SECOND END |
| HYDROSTATIC TEST PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 1.375 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 2ND LAYER RUBBER IMPREGNATED BRAIDED STEEL WIRE AND 1ST LAYER BRAIDED COTTON CORD AND OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD |
| OPERATING PRESSURE | 500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT |
| OUTSIDE DIAMETER | 1.750 INCHES NOMINAL |
| MEASURING METHOD AND LENGTH | 27.500 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | AIR AND FUEL/OIL, HYDROCARBON AND ETHYLENE GLYCOL SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 10.500 INCHES |
| NOMINAL THREAD SIZE | 1.875 INCHES FIRST END |
| RAISED FACE DIAMETER | 1.781 INCHES NOMINAL SECOND END |
| RAISED FACE HEIGHT | 0.005 INCHES MINIMUM AND 0.013 INCHES MAXIMUM SECOND END |
| SEAT ANGLE | 37.0 DEGREES FIRST END |
| VACUUM IN TORR | 50.8 |
| TEMP RATING | -40.0 FAHRENHEIT AND 250.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B FIRST END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD SERIES DESIGNATOR | UN FIRST END |
| THREAD QUANTITY PER INCH | 12 FIRST END |