| LAYER COMPOSITION AND LOCATION | 2ND LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND |
| 1ST LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND |
| OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| MINIMUM INSIDE BENDING RADIUS | 5.750 INCHES |
| INSIDE DIAMETER | 0.438 INCHES NOMINAL |
| OUTSIDE DIAMETER | 0.750 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| SWIVEL NUT FLARE 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| 37.0 DEGREES 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| ELBOW 2ND END |
| FLOW ANGLE | 45.0 DEGREES 2ND END |
| THREAD SERIES DESIGNATOR | UNF 1ST END |
| UNF 2ND END |
| NOMINAL THREAD SIZE | 0.750 INCHES 1ST END |
| 0.750 INCHES 2ND END |
| THREAD CLASS | 3B 1ST END |
| 3B 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| RIGHT-HAND 2ND END |
| FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| SPECIAL FEATURES | NUTS DRILLED FOR LOCKWIRE |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| THREADED INTERNAL TUBE 2ND END |
| MEASURING METHOD AND LENGTH | 16.250 INCHES NOMINAL WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND |
| 275.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 14000.0 POUNDS PER SQUARE INCH |
| EXTERIOR COLOR | NATURAL |
| OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |