| END CONNECTION DESIGN | STRAIGHT FIRST END |
| END CONNECTION DESIGN | STRAIGHT SECOND END |
| BURST TEST PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | INVERTED FLARE SECOND END |
| CONNECTION STYLE | SWIVEL NUT FLARE FIRST END |
| CONNECTION TYPE | THREADED EXTERNAL PIPE SECOND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| HYDROSTATIC TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.305 INCHES MINIMUM AND 0.336 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED STEEL WIRE AND 1ST LAYER BRAIDED FABRIC AND OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC |
| OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| OUTER COVERING ENVIRONMENTAL PROTECTION | MILDEW RESISTANT AND OIL RESISTANT |
| OUTSIDE DIAMETER | 0.547 INCHES MINIMUM AND 0.637 INCHES MAXIMUM |
| MEASURING METHOD AND LENGTH | 12.500 INCHES MINIMUM WORKING AND 13.500 INCHES MAXIMUM WORKING |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 2.750 INCHES |
| NOMINAL THREAD SIZE | 0.562 INCHES FIRST END |
| NOMINAL THREAD SIZE | 0.250 INCHES SECOND END |
| SEAT ANGLE | 30.0 DEGREES SECOND END |
| SEAT ANGLE | 37.0 DEGREES FIRST END |
| SPECIAL MARKINGS | CONTINUOUS WHITE LAYLINE OF ONLY MFRS NAME,SUPPLIERS CODE,SIZE,AND HOSE CURE DATE /QUARTER AND YEAR/ REPEATED AT APPROXIMATELY 12 IN. INTERVALS |
| TEMP RATING | -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 2B FIRST END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD DIRECTION | RIGHT-HAND SECOND END |
| THREAD SERIES DESIGNATOR | NPTF SECOND END |
| THREAD SERIES DESIGNATOR | UNF FIRST END |
| THREAD QUANTITY PER INCH | 18 FIRST END |
| THREAD QUANTITY PER INCH | 18 SECOND END |