| END CONNECTION DESIGN | STRAIGHT FIRST END |
| END FITTING COMPONENT AND MATERIAL | NIPPLE ALUMINUM ALLOY ALL ENDS |
| END FITTING COMPONENT AND MATERIAL | NUT STEEL FIRST END |
| END FITTING COMPONENT AND MATERIAL | SOCKET STEEL SECOND END |
| BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | SWIVEL NUT FLARE FIRST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| EXTERIOR COLOR | NATURAL |
| FITTING COMPONENT AND SURFACE TREATMENT | NUT CADMIUM FIRST END |
| FITTING COMPONENT AND SURFACE TREATMENT | NIPPLE ANODIZE ALL ENDS |
| FITTING COMPONENT AND SURFACE TREATMENT | SOCKET CADMIUM SECOND END |
| HYDROSTATIC TEST PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.173 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND CORROSION RESISTANT |
| OUTSIDE DIAMETER | 0.304 INCHES MINIMUM AND 0.343 INCHES MAXIMUM |
| MEASURING METHOD AND LENGTH | 15.125 INCHES MINIMUM WORKING AND 15.375 INCHES MAXIMUM WORKING |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON AND HYDRAULIC FLUID AND AIR AND WATER-ALCOHOL MIXTURES SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 2.000 INCHES |
| NOMINAL THREAD SIZE | 0.438 INCHES FIRST END |
| SEAT ANGLE | 37.0 DEGREES FIRST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC, POLYTETRAFLUOROETHYLENE |
| SPECIFICATION/STANDARD DATA | MIL MIL-H-27267 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| TEMP RATING | -65.0 FAHRENHEIT AND 275.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B FIRST END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD SERIES DESIGNATOR | UNF FIRST END |
| THREAD QUANTITY PER INCH | 20 FIRST END |