| END CONNECTION DESIGN | ELBOW 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| END FLANGE CONSTRUCTION | SOLID 2ND END |
| BURST TEST PRESSURE | 6500.0 POUNDS PER SQUARE INCH |
| CONNECTION TYPE | RECESSED FLANGE 2ND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CONNECTION STYLE | RECESSED W/GASKET GROOVE 2ND END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLANGE OUTSIDE DIAMETER | 2.000 INCHES NOMINAL 2ND END |
| FLANGE THICKNESS | 0.344 INCHES NOMINAL 2ND END |
| FLANGE STYLE | ROUND W/ OUT BOLT HOLES 2ND END |
| FLOW ANGLE | 45.0 DEGREES 2ND END |
| HYDROSTATIC TEST PRESSURE | 3250.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 1.250 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY WRAPPED FABRIC AND 2ND LAYER SPIRALLY WRAPPED FABRIC AND 3RD LAYER BRAIDED WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| OUTSIDE DIAMETER | 2.000 INCHES NOMINAL |
| MAXIMUM OPERATING PRESSURE | 1625.0 POUNDS PER SQUARE INCH |
| MEASURING METHOD AND LENGTH | 25.500 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | AMMONIA, LIQUID AND HYDRAULIC FLUID, SILICATE-ESTER BASE SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 16.500 INCHES |
| NOMINAL THREAD SIZE | 1.625 INCHES 1ST END |
| OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND OZONE RESISTANT |
| RECESS DEPTH | 0.125 INCHES NOMINAL 2ND END |
| RECESS DIAMETER | 1.188 INCHES NOMINAL 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| SPECIFICATION/STANDARD DATA | SAE J517,100R2,TY B-81343 NATIONAL STD/SPEC |
| TEMP RATING | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| THREAD CLASS | 2B 1ST END |
| THREAD SERIES DESIGNATOR | UN 1ST END |
| THREAD QUANTITY PER INCH | 12 1ST END |