| SEAT ANGLE | 30.0 DEGREES 1ST END |
| 30.0 DEGREES 2ND END |
| END CONNECTION DESIGN | STRAIGHT 1ST END |
| STRAIGHT 2ND END |
| THREAD SERIES DESIGNATOR | UNS 1ST END |
| NPT 2ND END |
| NOMINAL THREAD SIZE | 1.625 INCHES 1ST END |
| 1.250 INCHES 2ND END |
| THREAD QUANTITY PER INCH | 14 1ST END |
| THREAD CLASS | 2B 1ST END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| RIGHT-HAND 2ND END |
| SPECIAL FEATURES | HOSE MEETS REQUIREMENTS OF SAE J1402,TYPE D,CLASS 1 |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| THREADED EXTERNAL PIPE 2ND END |
| MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID, WATER BASE AND |
| FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 61.500 INCHES NOMINAL OVERALL |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -40.0 DEG CELSIUS AND |
| 93.0 DEG CELSIUS SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 625.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 1250.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 2500.0 POUNDS PER SQUARE INCH |
| VACUUM IN TORR | 254.0 |
| OUTER COVERING ENVIRONMENTAL PROTECTION | MILDEW RESISTANT AND |
| OIL RESISTANT |
| LAYER COMPOSITION AND LOCATION | 2ND LAYER RUBBER IMPREGNATED BRAIDED STEEL WIRE AND |
| 1ST LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD AND |
| OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD |
| MINIMUM INSIDE BENDING RADIUS | 9.000 INCHES |
| INSIDE DIAMETER | 1.125 INCHES NOMINAL |
| OUTSIDE DIAMETER | 1.500 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| INVERTED FLARE 2ND END |