| END CONNECTION DESIGN | STRAIGHT FIRST END |
| END CONNECTION DESIGN | ELBOW SECOND END |
| BURST TEST PRESSURE | 2500.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | SWIVEL NUT FLARE SECOND END |
| CONNECTION STYLE | SWIVEL NUT FLARE FIRST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE SECOND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| FLOW ANGLE | 30.0 DEGREES SECOND END |
| HYDROSTATIC TEST PRESSURE | 1500.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.875 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| OUTER COVERING ENVIRONMENTAL PROTECTION | FIRE RESISTANT |
| OUTSIDE DIAMETER | 1.156 INCHES NOMINAL |
| MEASURING METHOD AND LENGTH | 16.130 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 5.500 INCHES |
| NOMINAL THREAD SIZE | 1.312 INCHES FIRST END |
| NOMINAL THREAD SIZE | 1.312 INCHES SECOND END |
| SEAT ANGLE | 37.0 DEGREES FIRST END |
| SEAT ANGLE | 37.5 DEGREES SECOND END |
| SPECIAL FEATURES | EXTERNAL SUPPORT CONSISTS OF A PREBENT 60.0 DEG ALUMINUM SLEEVE |
| TEMP RATING | -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B FIRST END |
| THREAD CLASS | 3B SECOND END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD DIRECTION | RIGHT-HAND SECOND END |
| THREAD QUANTITY PER INCH | 12 SECOND END |
| THREAD SERIES DESIGNATOR | UNF FIRST END |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT (UNJ) SECOND END |