| END CONNECTION DESIGN | STRAIGHT FIRST END |
| END CONNECTION DESIGN | STRAIGHT SECOND END |
| END FLANGE CONSTRUCTION | SOLID SECOND END |
| BOLT HOLE DIAMETER | 0.266 INCHES NOMINAL SECOND END |
| BOLT HOLE QUANTITY | 4 SECOND END |
| BURST TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.812 INCHES NOMINAL SECOND END |
| CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.812 INCHES NOMINAL SECOND END |
| CONNECTION STYLE | PLAIN SWIVEL SECOND END |
| CONNECTION STYLE | SWIVEL NUT FLARE FIRST END |
| CONNECTION TYPE | PLAIN FACE FLANGE SECOND END |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLANGE LENGTH | 2.375 INCHES NOMINAL SECOND END |
| FLANGE STYLE | RECTANGULAR (INCLUDES SQUARE) SECOND END |
| FLANGE WIDTH | 2.375 INCHES NOMINAL SECOND END |
| HYDROSTATIC TEST PRESSURE | 800.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 1.375 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE |
| OPERATING PRESSURE | 250.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| OUTSIDE DIAMETER | 1.704 INCHES NOMINAL |
| MEASURING METHOD AND LENGTH | 22.000 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 9.000 INCHES |
| NOMINAL THREAD SIZE | 1.875 INCHES FIRST END |
| SEAT ANGLE | 37.0 DEGREES FIRST END |
| TEMP RATING | -40.0 FAHRENHEIT AND 300.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B FIRST END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT (UNJ) FIRST END |
| THREAD QUANTITY PER INCH | 12 FIRST END |