| SWIVEL NUT FLARE 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| 37.0 DEGREES 2ND END |
| END CONNECTION DESIGN | ELBOW 1ST END |
| ELBOW 2ND END |
| FLOW ANGLE | 45.0 DEGREES 1ST END |
| 90.0 DEGREES 2ND END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 180.0 |
| THREAD SERIES DESIGNATOR | UNJ 1ST END |
| UNJ 2ND END |
| NOMINAL THREAD SIZE | 1.312 INCHES 1ST END |
| 1.312 INCHES 2ND END |
| THREAD QUANTITY PER INCH | 12 1ST END |
| 12 2ND END |
| THREAD CLASS | 3B 1ST END |
| 3B 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| RIGHT-HAND 2ND END |
| FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY AND |
| REUSABLE END FITTINGS AND |
| SELF-SEALING |
| SPECIAL FEATURES | SLEEVE,BULLET SEALING RUBBER COVERED WITH A RUBBER IMPREGNATED FIBER WRAP AND TWO CRES CLAMPS |
| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| THREADED INTERNAL TUBE 2ND END |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MEASURING METHOD AND LENGTH | 17.500 INCHES NOMINAL WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND |
| 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| EXTERIOR COLOR | BLACK |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND |
| MILDEW RESISTANT |
| LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND |
| OUTER LAYER MOLDED RUBBER, CHLOROPRENE AND |
| 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE |
| MINIMUM INSIDE BENDING RADIUS | 5.500 INCHES |
| INSIDE DIAMETER | 0.875 INCHES NOMINAL |
| OUTSIDE DIAMETER | 1.141 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |