| CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| THREADED INTERNAL TUBE 2ND END |
| MEASURING METHOD AND LENGTH | 12.812 INCHES NOMINAL WORKING |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| TEMP RATING | -65.0 DEG FAHRENHEIT AND |
| 400.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| OUTER COVERING ENVIRONMENTAL PROTECTION | CORROSION RESISTANT |
| LAYER COMPOSITION AND LOCATION | 2ND LAYER SPIRALLY WRAPPED POLYTETRAFLUOROETHYLENE FABRIC AND |
| 4TH LAYER SPIRALLY WRAPPED POLYTETRAFLUOROETHYLENE FABRIC AND |
| 6TH LAYER SPIRALLY WRAPPED POLYTETRAFLUOROETHYLENE FABRIC AND |
| 8TH LAYER SPIRALLY WRAPPED POLYTETRAFLUOROETHYLENE FABRIC AND |
| OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND |
| 1ST LAYER STEEL WIRE, CADMIUM COATED AND |
| 3RD LAYER STEEL WIRE, CADMIUM COATED AND |
| 5TH LAYER STEEL WIRE, CADMIUM COATED AND |
| 7TH LAYER STEEL WIRE, CADMIUM COATED |
| MINIMUM INSIDE BENDING RADIUS | 7.750 INCHES |
| INSIDE DIAMETER | 0.650 INCHES NOMINAL |
| OUTSIDE DIAMETER | 1.070 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL CORROSION RESISTING ALL ENDS |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING PASSIVATE 1ST END |
| CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| SWIVEL NUT FLARE 2ND END |
| SEAT ANGLE | 37.0 DEGREES 1ST END |
| 37.0 DEGREES 2ND END |
| END CONNECTION DESIGN | ELBOW 1ST END |
| ELBOW 2ND END |
| FLOW ANGLE | 45.0 DEGREES 1ST END |
| 90.0 DEGREES 2ND END |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 186.0 |
| THREAD SERIES DESIGNATOR | UN 1ST END |
| UN 2ND END |
| NOMINAL THREAD SIZE | 1.000 INCHES 1ST END |
| 1.000 INCHES 2ND END |
| THREAD QUANTITY PER INCH | 16 1ST END |
| 16 2ND END |
| THREAD CLASS | 3B 1ST END |
| 3B 2ND END |
| THREAD DIRECTION | RIGHT-HAND 1ST END |
| RIGHT-HAND 2ND END |
| FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| SPECIAL FEATURES | EXTERNAL PROTECTION TYPE AND LOCATION- OVERALL CHAFE GUARD, SPIRALLY WRAPPED POLYTETRAFLUOROETHYLENE , INNER CONVEYING TUBE MATERIAL-PLASTIC, POLYTETRAFLUOROETHYLENE |