| END CONNECTION DESIGN | STRAIGHT FIRST END |
| END CONNECTION DESIGN | ELBOW SECOND END |
| END FLANGE CONSTRUCTION | SOLID FIRST END |
| END FLANGE CONSTRUCTION | SOLID SECOND END |
| BURST TEST PRESSURE | 8000.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | RECESSED W/GASKET GROOVE FIRST END |
| CONNECTION STYLE | RECESSED W/GASKET GROOVE SECOND END |
| CONNECTION TYPE | RECESSED FLANGE FIRST END |
| CONNECTION TYPE | RECESSED FLANGE SECOND END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FLANGE OUTSIDE DIAMETER | 1.750 INCHES NOMINAL SECOND END |
| FLANGE OUTSIDE DIAMETER | 2.000 INCHES NOMINAL FIRST END |
| FLANGE THICKNESS | 0.312 INCHES NOMINAL FIRST END |
| FLANGE THICKNESS | 0.312 INCHES NOMINAL SECOND END |
| FLANGE STYLE | ROUND W/ OUT BOLT HOLES FIRST END |
| FLANGE STYLE | ROUND W/ OUT BOLT HOLES SECOND END |
| FLOW ANGLE | 90.0 DEGREES SECOND END |
| HYDROSTATIC TEST PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.985 INCHES MINIMUM AND 1.040 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | 2ND LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC AND 1ST LAYER BRAIDED STEEL WIRE |
| OUTSIDE DIAMETER | 1.516 INCHES MINIMUM AND 1.609 INCHES MAXIMUM |
| MEASURING METHOD AND LENGTH | 39.000 INCHES NOMINAL OVERALL |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 12.000 INCHES |
| OPERATING PRESSURE | 2000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| RECESS DEPTH | 0.125 INCHES NOMINAL FIRST END |
| RECESS DEPTH | 0.125 INCHES NOMINAL SECOND END |
| RECESS DIAMETER | 0.875 INCHES NOMINAL SECOND END |
| RECESS DIAMETER | 1.937 INCHES NOMINAL FIRST END |
| TEMP RATING | -40.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE |