| END CONNECTION DESIGN | STRAIGHT FIRST END |
| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING ALUMINUM ALLOY ALL ENDS |
| BURST TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | SWIVEL NUT FLARE FIRST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING ANODIZE FIRST END |
| HYDROSTATIC TEST PRESSURE | 600.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.125 INCHES NOMINAL |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND FUEL RESISTANT AND OIL RESISTANT |
| OUTSIDE DIAMETER | 0.375 INCHES NOMINAL |
| MEASURING METHOD AND LENGTH | 4.500 INCHES NOMINAL WORKING |
| MEDIA FOR WHICH DESIGNED | AIR AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| MINIMUM INSIDE BENDING RADIUS | 1.000 INCHES |
| NOMINAL THREAD SIZE | 0.312 INCHES FIRST END |
| OPERATING PRESSURE | 300.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| SEAT ANGLE | 37.0 DEGREES FIRST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, SYNTHETIC |
| SPECIFICATION/STANDARD DATA | 88044-AN6270 GOVERNMENT STANDARD |
| VACUUM IN TORR | 254.0 |
| TEMP RATING | -65.0 FAHRENHEIT AND 158.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B FIRST END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) FIRST END |