| END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL CORROSION RESISTING ALL ENDS |
| ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 90.0 |
| BURST TEST PRESSURE | 600.0 POUNDS PER SQUARE INCH |
| CONNECTION STYLE | SWIVEL NUT, FLARELESS FIRST END |
| CONNECTION TYPE | THREADED INTERNAL TUBE FIRST END |
| CROSS-SECTIONAL SHAPE STYLE | ROUND |
| FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING PASSIVATE FIRST END |
| FLOW ANGLE | 90.0 DEGREES FIRST END |
| HYDROSTATIC TEST PRESSURE | 300.0 POUNDS PER SQUARE INCH |
| INSIDE DIAMETER | 0.321 INCHES MINIMUM AND 0.398 INCHES MAXIMUM |
| INSIDE SURFACE CONDITION | SMOOTH |
| LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| OPERATING PRESSURE | 200.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| OUTER COVERING ENVIRONMENTAL PROTECTION | MILDEW RESISTANT |
| OUTSIDE DIAMETER | 0.477 INCHES MINIMUM AND 0.641 INCHES MAXIMUM |
| MEASURING METHOD AND LENGTH | 33.000 INCHES NOMINAL WORKING |
| MINIMUM INSIDE BENDING RADIUS | 2.500 INCHES |
| NOMINAL THREAD SIZE | 0.562 INCHES FIRST END |
| SEAT ANGLE | 12.0 DEGREES FIRST END |
| SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, BUNA-N |
| TEMP RATING | -65.0 FAHRENHEIT AND 200.0 FAHRENHEIT SINGLE RESPONSE |
| THREAD CLASS | 3B FIRST END |
| THREAD DIRECTION | RIGHT-HAND FIRST END |
| THREAD SERIES DESIGNATOR | UNF FIRST END |