|
|
|
National Stock Number:
4330-01-601-8103
Federal Supply Class:
4330
National Item Identification Number:
016018103
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 30P210QVM2KS161 | 05779 | PARKER-HANNIFIN CORPORATION |
|
Techincal Specification:
| DISTANCE FROM BOTTOM OF BODY TO CENTER OF INLET | 210.0 INCHES NOMINAL | | BODY OVERALL LENGTH | 292.6 INCHES NOMINAL | | DESIGN TYPE | NONREUSABLE | | FILTERING MEDIA DESIGN | MESH SINGLE FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 10.0 NOMINAL | | PART NAME ASSIGNED BY CONTROLLING AGENCY | HIGH PRESSURE FILTER | | MATERIAL | ALUMINUM ALLOY 6061 SEDIMENT BOWL | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | SPECIAL FEATURES | FILTER FUNCTION/PURPOSE IS TO PUMP GENERATED DEBRIS BEFORE IT JAMS A VALVE OR SCORES A CYLINDER;MAXIMUM FLOW RATE 45 GPM;HAS VISUAL SAUTO RESET INDICATOR;;FILTER COMPOSED OF MICROGLASS III;HAS FLUOCARBON SEAL;MAXIMUM ALLOWABLE OPERATION PRESSURE IS 3000 PSI;RATE OF FATIGUE PRESSURE 2000 PSI;BYPASS PRRESSURE SETTING 50 PSI | | STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) AND MOUNTING FLANGE | | TEMP RATING | -15.0 FAHRENHEIT MINIMUM AND 275.0 FAHRENHEIT MAXIMUM |
|
|