|
|
|
National Stock Number:
4330-01-571-1541
Federal Supply Class:
4330
National Item Identification Number:
015711541
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| HSA000566 | Z1480 | NQEA MARINE SAFETY PTY LTD | | SO-318V | 13573 | PARKER HANNIFIN CORP | | SO-318V | Z2YA1 | GILBARCO AUSTRALIA LTD |
|
Techincal Specification:
| BODY LENGTH | 30.000 INCHES NOMINAL | | BODY OUTSIDE DIAMETER | 18.375 INCHES NOMINAL | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | PART NAME ASSIGNED BY CONTROLLING AGENCY | HORIZONTAL FILTER/SEPARATIONS FOR MOBILE FUELING, HV SERIES END OPENING VESSELS | | STYLE DESIGNATOR | INLINE DISPOSAL W/THREADED CONNECTIONS | | SPECIAL FEATURES | VOLUME US GALLON:18; WEIGHT WITH SKID:400 LBS; SWING BOLTED CLOSURE, BUNA-N O-RING COVER SEAL; SPIDER ASSEMBLY TO STABILIZE CARTRIDGES; MIL-C-4556 EPOXY COATED INTERIOR, PRIMED EXTERIOR; FITTINGS FOR PRESSURE RELIEF VALVE, AIR VENT, AND PRESSURE GAUGE; DIAMETER:14 INCHES |
|
|