|
|
|
National Stock Number:
4330-01-439-6135
Federal Supply Class:
4330
National Item Identification Number:
014396135
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 0660R005BN3HC | 59793 | HYDAC CORP | | 0660R005BNHC | 59793 | HYDAC CORP | | 1263016 | 59793 | HYDAC CORP | | 6139171 FIND 14 | 59793 | HYDAC CORP | | 6139171 FIND 14 | 80091 | NAVAL FACILITIES ENGINEERING COMMAND | | 6139171 | 80091 | NAVAL FACILITIES ENGINEERING COMMAND |
|
Techincal Specification:
| STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | BODY DIAMETER | 4.500 INCHES NOMINAL | | BODY INSIDE DIAMETER | 2.700 INCHES NOMINAL | | BODY OVERALL LENGTH | 13.100 INCHES NOMINAL | | MATERIAL | RUBBER BUNA N SEAL | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | DESIGN TYPE | NONREUSABLE | | FILTRATION RATING IN MICRONS | 5.0 ABSOLUTE | | FLOW DIRECTION | OUTSIDE IN | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | TEMP RATING | 15.0 DEG FAHRENHEIT MINIMUM AND | | 250.0 DEG FAHRENHEIT MAXIMUM | | DROP PRESSURE | 2.0 POUNDS PER SQUARE INCH | | DIFFERENTIAL PRESSURE | 250.0 POUNDS PER SQUARE INCH | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FEATURES PROVIDED | BY-PASS VALVE | | SPECIAL FEATURES | RETURN LINE ELEMENT; HAS BUILT-IN BYPASS VALVE WITH STANDARD RETURN LINE BYPASS VALVE CRACKING PRESSURE OF 43 PSID |
|
|