|
|
|
National Stock Number:
4330-01-425-6854
Federal Supply Class:
4330
National Item Identification Number:
014256854
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 1602AS274 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER | | 1602AS274-1 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGED ORIGINAL DESIGN ACTIVITY NOT MATERIAL/PARTS SUPPLIER | | 27776 | 10989 | PALL AEROPOWER CORP SUB OF PALL CORP MECTRON INDUSTRIES DIV |
|
Techincal Specification:
| BODY INSIDE DIAMETER | 0.500 INCHES NOMINAL | | BODY OVERALL LENGTH | 6.030 INCHES MINIMUM AND 6.090 INCHES MAXIMUM | | CRITICALITY CODE JUSTIFICATION | FEAT | | DESIGN TYPE | LIMITED | | DIFFERENTIAL PRESSURE | 300.0 POUNDS PER SQUARE INCH | | FILTERING MEDIA DESIGN | SINTERED SINGLE FILTERING MEDIA RESPONSE | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FILTRATION RATING IN MICRONS | 40.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | LARGEST OUTSIDE DIAMETER | 1.040 INCHES NOMINAL | | MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM | | MEDIA FOR WHICH DESIGNED | NITROGEN, LIQUID AND OXYGEN, LIQUID | | SMALLEST OUTSIDE DIAMETER | 0.655 INCHES NOMINAL | | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY CLEANED FOR OXYGEN SERVICE | | SPECIAL FEATURES | ELEMENT TO BE CLEANED FOR OXYGEN SERVICE IN ACCORDANCE WITH MIL-I-52211,METHOD A,CLASS B | | STYLE DESIGNATOR | CONICAL W/OUT CONTAINER |
|
|