|
|
|
National Stock Number:
4330-01-422-0906
Federal Supply Class:
4330
National Item Identification Number:
014220906
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| AB1U100Z3H13 | 9Y875 | PALL PROCESS FILTRATION CORP |
|
Techincal Specification:
| BODY DIAMETER | 2.375 INCHES NOMINAL | | BODY INSIDE DIAMETER | 1.1875 INCHES NOMINAL | | BODY OVERALL LENGTH | 10.000 INCHES NOMINAL | | DESIGN TYPE | NONREUSABLE | | FILTRATION RATING IN MICRONS | 6.0 NOMINAL | | FILTERING MEDIA DESIGN | CORRUGATED SINGLE FILTERING MEDIA RESPONSE | | FILTERING SURFACE AREA | 9.2 SQUARE FEET | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | NYLON (USE PCP000) AND POLYESTER (USE PCY000) FILTERING MEDIUM | | MATERIAL | PLASTIC POLYPROPYLENE CONTAINER/CARTRIDGE | | MATERIAL | RUBBER BUNA N SEAL | | MEDIA FOR WHICH DESIGNED | LIQUID, INGESTED AND LIQUID FOOD | | SPECIAL FEATURES | 0.03 PSID/GPM PRESSURE DROP PER 10" MODULE | | STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (NON-RIGID) | | TEMP RATING | 257.0 FAHRENHEIT MAXIMUM |
|
|