|
|
|
National Stock Number:
4330-01-418-6564
Federal Supply Class:
4330
National Item Identification Number:
014186564
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 601486 | 25204 | ADMIRAL FILTER COMPANY LLC | | 690264 | 25204 | ADMIRAL FILTER COMPANY LLC | | 690264 ITEM 3 | 25204 | ADMIRAL FILTER COMPANY LLC | | PL690264 ITEM 3 | 25204 | ADMIRAL FILTER COMPANY LLC |
|
Techincal Specification:
| DESIGN TYPE | LIMITED | | DROP PRESSURE | 2.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 2.810 INCHES NOMINAL | | BODY INSIDE DIAMETER | 1.640 INCHES NOMINAL | | BODY OVERALL LENGTH | 11.000 INCHES NOMINAL | | FILTERING MEDIA DESIGN | POROUS SINGLE FILTERING MEDIA RESPONSE | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-C-15726 MIL SPEC SINGLE MATERIAL RESPONSE CONTAINER/CARTRIDGE | | MATERIAL | COPPER ALLOY CONTAINER/CARTRIDGE | | MATERIAL | PLASTIC POLYPROPYLENE FILTERING MEDIUM | | III STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | WATER | | TEMP RATING | 28.0 DEG FAHRENHEIT MINIMUM AND 85.0 DEG FAHRENHEIT MAXIMUM |
|
|