|
|
|
National Stock Number:
4330-01-417-2388
Federal Supply Class:
4330
National Item Identification Number:
014172388
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 2789853 | 89749 | CLARK MATERIAL HANDLING COMPANY | | 8003267 | 89749 | CLARK MATERIAL HANDLING COMPANY |
|
Techincal Specification:
| FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FILTERING SURFACE AREA | 900.0 SQUARE CENTIMETERS | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM | | III STYLE DESIGNATOR | SUMP TYPE | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | ANY ACCEPTABLE | | NOMINAL THREAD SIZE | 2.500 INCHES | | TEMP RATING | -20.0 DEG FAHRENHEIT MINIMUM AND 200.0 DEG FAHRENHEIT MAXIMUM | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UN | | DESIGN TYPE | REUSABLE | | DROP PRESSURE | 5.0 POUNDS PER SQUARE INCH | | BODY DIAMETER | 54.0 MILLIMETERS NOMINAL | | BODY OVERALL LENGTH | 259.0 MILLIMETERS NOMINAL |
|
|