|
|
|
National Stock Number:
4330-01-417-2231
Federal Supply Class:
4330
National Item Identification Number:
014172231
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 26-1101-59 | 02978 | RENK AMERICA LLC | | P170211 | 18265 | DONALDSON COMPANY, INC. |
|
Techincal Specification:
| DROP PRESSURE | 2.6 POUNDS PER SQUARE INCH | | BODY DIAMETER | 4.770 INCHES NOMINAL | | BODY OVERALL LENGTH | 11.630 INCHES NOMINAL | | DESIGN TYPE | NONREUSABLE | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FILTRATION RATING IN MICRONS | 22.0 ABSOLUTE AND 15.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | STEEL CONTAINER/CARTRIDGE | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON OR WATER/ALCOHOL MIXTURE | | NOMINAL THREAD SIZE | 1.750 INCHES | | SPECIAL FEATURES | 800.0PSI STATIC PRESSURE; 350.0PSI OPERATING PRESSURE; INNER LINER AND END CAPS TIN PLATED STEEL; BAFFLE CAST IRON | | STYLE DESIGNATOR | CYLINDRICAL W/ INTEGRAL OUTER CASING | | TEMP RATING | -40.0 FAHRENHEIT MINIMUM AND 250.0 FAHRENHEIT MAXIMUM | | THREAD DIRECTION | RIGHT-HAND | | THREAD SERIES DESIGNATOR | UN |
|
|