|
|
|
National Stock Number:
4330-01-415-1038
Federal Supply Class:
4330
National Item Identification Number:
014151038
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| G-2061 | 55260 | GIL, INC. | | G-4157 PIECE 61 | 55260 | GIL, INC. | | G-4157 REV B | 55260 | GIL, INC. |
|
Techincal Specification:
| STYLE DESIGNATOR | RECTANGULAR (INCL SQUARE) | | OVERALL WIDTH | 14.500 INCHES NOMINAL | | BODY THICKNESS | 0.3125 INCHES NOMINAL | | BODY OVERALL LENGTH | 26.500 INCHES NOMINAL | | MATERIAL | COPPER ALLOY AND | | NICKEL ALLOY FILTERING MEDIUM | | COPPER ALLOY FRAME | | SURFACE TREATMENT | PLASTIC POLYTETRAFLUOROETHYLENE FILTERING MEDIUM | | FILTERING MEDIA DESIGN | MESH SINGLE FILTERING MEDIA RESPONSE | | MESH SIZE | 8.0 AND | | 60.0 | | WIRE DIAMETER | 0.020 INCHES MINIMUM AND | | 0.075 INCHES MAXIMUM | | DESIGN TYPE | REUSABLE | | FLOW DIRECTION | PARALLEL | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | TEMP RATING | 120.0 DEG FAHRENHEIT MAXIMUM | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | SPECIAL FEATURES | 2-PC SCREEN ASSEMBLY COMPONENT OF FILTER-SEPARATOR |
|
|