|
|
|
National Stock Number:
4330-01-396-1977
Federal Supply Class:
4330
National Item Identification Number:
013961977
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 0-007-C-03-R1-NU-12-00-Z72045D | 11524 | FLANDERS FILTERS, INC | | 0-007-C-43-R1-NU-12-00-Z72045E | 11524 | FLANDERS FILTERS, INC | | 0-007-C-43-R1-NU-12-00-Z72045F | 11524 | FLANDERS FILTERS, INC |
|
Techincal Specification:
| DESIGN TYPE | NONREUSABLE | | BODY DIAMETER | 14.125 INCHES NOMINAL | | BODY OVERALL LENGTH | 11.500 INCHES NOMINAL | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FILTRATION RATING IN MICRONS | 0.3 ABSOLUTE | | FLOW DIRECTION | PARALLEL | | MATERIAL | GLASS FILTERING MEDIUM AND ALUMINUM FILTERING MEDIUM | | MATERIAL | RUBBER SYNTHETIC SEAL | | MATERIAL | STEEL COMP 304 FRAME | | III STYLE DESIGNATOR | SOLID CYLINDRICAL W/ CONTAINER (NON-RIGID) | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | AIR | | SPECIAL FEATURES | SEAL MATERIAL IS NEOPRENE; FILTERING MEDIUM FROM FLAT SHEET GRADE (ME-FN700) | | TEMP RATING | 250.0 DEG FAHRENHEIT MAXIMUM |
|
|