|
|
|
National Stock Number:
4330-01-395-5290
Federal Supply Class:
4330
National Item Identification Number:
013955290
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 516-5911058ITEM11 | 53711 | NAVAL SEA SYSTEMS COMMAND | | P19-4409 | 18265 | DONALDSON COMPANY, INC. | | P199739 | 18265 | DONALDSON COMPANY, INC. |
|
Techincal Specification:
| DROP PRESSURE | ERR-060 | | BODY DIAMETER | 7.750 INCHES NOMINAL | | BODY OVERALL LENGTH | 5.125 INCHES NOMINAL | | DESIGN TYPE | NONREUSABLE | | FILTERING MEDIA DESIGN | CORRUGATED SECOND FILTERING MEDIA RESPONSE | | FILTERING MEDIA DESIGN | SPUN FIRST FILTERING MEDIA RESPONSE | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FILTRATION RATING IN MICRONS | 3.0 NOMINAL | | FLOW DIRECTION | PARALLEL | | MATERIAL | GLASS FIBER AND ALUMINUM FILTERING MEDIUM | | MATERIAL | RUBBER SEAL | | MATERIAL | STEEL CORROSION RESISTING BODY | | MEDIA FOR WHICH DESIGNED | AIR | | MOUNTING FLANGE DIAMETER | 9.000 INCHES NOMINAL | | SPECIAL FEATURES | FLANGE RETAINS FILTER ELEMENT IN DUCTWORK; 40.0SCFM | | STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) AND MOUNTING FLANGE | | TEMP RATING | 275.0 FAHRENHEIT MAXIMUM |
|
|