|
|
|
National Stock Number:
4330-01-390-3615
Federal Supply Class:
4330
National Item Identification Number:
013903615
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 29553 | 10989 | PALL AEROPOWER CORP SUB OF PALL CORP MECTRON INDUSTRIES DIV | | 969C794-1 | 83843 | SUNDSTRAND CORP ELECTRIC POWER SYSTEMS DIV | | 969C794-1 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
|
Techincal Specification:
| FILTERING MEDIA DESIGN | MESH SINGLE FILTERING MEDIA RESPONSE | | DESIGN TYPE | NONREUSABLE | | FLOW DIRECTION | OUTSIDE IN | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | TEMP RATING | -40.0 DEG FAHRENHEIT MINIMUM AND | | 302.0 DEG FAHRENHEIT MAXIMUM | | DROP PRESSURE | 2.27 POUNDS PER SQUARE INCH | | DIFFERENTIAL PRESSURE | 15.0 POUNDS PER SQUARE INCH | | SUPPLEMENTARY FEATURES | ELEMENT CONSTRUCTION, EPOXY BONDED TO FITTING AND IS RESISTANCE WELDED TO END RING; MATL, FITTING, ALUM AMS 4121, ELEMENT HARDWARE AISI TYPE 300 CRES, FILTER MESH AISI TYPE 304L CRES |
|
|