|
|
|
National Stock Number:
4330-01-384-6411
Federal Supply Class:
4330
National Item Identification Number:
013846411
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 062188-0009-1 | 0F6B1 | PMI TECHNOLOGIES INC | | 062188-0009-1 ITEM 002 | 0F6B1 | PMI TECHNOLOGIES INC | | HP-20-0375 | 08ZA2 | PROTECTIVE ENGINEERING CONCEPTS INC DBA PECI | | NNAF-2-0.375 | 0F6B1 | PMI TECHNOLOGIES INC |
|
Techincal Specification:
| DESIGN TYPE | REUSABLE | | DISTANCE FROM BOTTOM OF BODY TO CENTER OF INLET | 5.620 INCHES NOMINAL | | BODY HEIGHT | 6.660 INCHES NOMINAL | | BODY LENGTH | 10.625 INCHES NOMINAL | | BODY WIDTH | 5.750 INCHES NOMINAL | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | RUBBER BUNA N SEAL | | MATERIAL | STEEL CORROSION RESISTING BODY | | MATERIAL | STEEL CORROSION RESISTING FILTERING MEDIUM | | III STYLE DESIGNATOR | TEE TYPE (HYDRAULIC) | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | AIR |
|
|