|
|
|
National Stock Number:
4330-01-360-2451
Federal Supply Class:
4330
National Item Identification Number:
013602451
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 3161-15 | 43990 | NORGREN C A CO | | 3161-18 | 43990 | NORGREN C A CO |
|
Techincal Specification:
| STYLE DESIGNATOR | CONICAL W/OUT CONTAINER | | TAPERED HOLE MINOR DIAMETER | 0.830 INCHES NOMINAL | | TAPERED HOLE MAJOR DIAMETER | 0.940 INCHES NOMINAL | | SMALLEST OUTSIDE DIAMETER | 1.090 INCHES NOMINAL | | LARGEST OUTSIDE DIAMETER | 1.200 INCHES NOMINAL | | BODY OVERALL LENGTH | 1.450 INCHES NOMINAL | | MATERIAL | PLASTIC POLYPROPYLENE FILTERING MEDIUM | | FILTERING MEDIA DESIGN | POROUS SINGLE FILTERING MEDIA RESPONSE | | DESIGN TYPE | LIMITED | | FILTRATION RATING IN MICRONS | 50.0 ABSOLUTE AND | | 40.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MEDIA FOR WHICH DESIGNED | AIR | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | SPECIAL FEATURES | 0.13 IN. WALL THK; ELEMENT REPLACED WHEN 10.0 TO 15.0 PSI DIFFERENTIAL PRESSURE REACHED AFTER CLEANING |
|
|