| STYLE DESIGNATOR | HIGH PRESSURE THREADED BODY |
| BODY OUTSIDE DIAMETER | 6.250 INCHES NOMINAL |
| BODY HEIGHT | 25.000 INCHES NOMINAL |
| DISTANCE FROM BOTTOM OF BODY TO CENTER OF INLET | 1.250 INCHES NOMINAL |
| MATERIAL | IRON BODY |
| STEEL CONTAINER/CARTRIDGE |
| CELLULOSE AND |
| RESIN SYNTHETIC FILTERING MEDIUM |
| RUBBER BUNA N SEAL |
| FILTERING MEDIA DESIGN | PLEATED ALL FILTERING MEDIA RESPONSES |
| DESIGN TYPE | NONREUSABLE |
| FILTERING ELEMENT QUANTITY | 2 |
| FILTRATION RATING IN MICRONS | 10.0 NOMINAL |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON |
| MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| TEMP RATING | 300.0 DEG FAHRENHEIT MAXIMUM |
| DIFFERENTIAL PRESSURE | 25.0 POUNDS PER SQUARE INCH |
| FIRST INTAKE CONNECTION TYPE | THREADED INTERNAL PIPE HEAD SIDE |
| FIRST INTAKE THREAD SERIES DESIGNATOR | UN |
| FIRST INTAKE NOMINAL THREAD SIZE | 1.875 INCHES |
| FIRST INTAKE THREAD QUANTITY PER INCH | 12 |
| FIRST INTAKE THREAD CLASS | 2B |
| FIRST INTAKE THREAD DIRECTION | RIGHT-HAND |
| FIRST DISCHARGE CONNECTION RELATIONSHIP TO INTAKE CONNECTION | IDENTICAL TO FIRST INTAKE CONNECTION |
| MOUNTING TYPE | UNTHREADED HOLE HEAD |
| MOUNTING HOLE QUANTITY | 4 |
| DISTANCE BETWEEN MOUNTING HOLE CENTERS | 4.500 INCHES NOMINAL AND |
| 5.000 INCHES NOMINAL |
| MOUNTING HOLE DIAMETER | 0.562 INCHES NOMINAL |
| FILTERING SYSTEM FOR WHICH DESIGNED | BY-PASS FLOW OR |
| FULL FLOW |
| FEATURES PROVIDED | DRAIN PLUG AND |
| BY-PASS VALVE AND |
| AIR BLEED VALVE |
| SPECIAL FEATURES | DIRT ALARM AND CAP |