| STYLE DESIGNATOR | HIGH PRESSURE THREADED BODY |
| BODY OUTSIDE DIAMETER | 5.500 INCHES NOMINAL |
| BODY WIDTH | 5.500 INCHES NOMINAL |
| BODY HEIGHT | 23.810 INCHES NOMINAL |
| DISTANCE FROM BOTTOM OF BODY TO CENTER OF INLET | 1.250 INCHES NOMINAL |
| MATERIAL | STEEL BODY |
| STEEL CONTAINER/CARTRIDGE |
| CELLULOSE FILTERING MEDIUM |
| RUBBER BUNA N SEAL |
| FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE |
| DESIGN TYPE | REUSABLE |
| FILTERING ELEMENT QUANTITY | 2 |
| FILTRATION RATING IN MICRONS | 10.0 NOMINAL |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON |
| MAXIMUM OPERATING PRESSURE | 2500.0 POUNDS PER SQUARE INCH |
| DROP PRESSURE | 8.0 POUNDS PER SQUARE INCH |
| FIRST INTAKE CONNECTION TYPE | THREADED INTERNAL TUBE HEAD SIDE |
| FIRST INTAKE THREAD SERIES DESIGNATOR | UN |
| FIRST INTAKE NOMINAL THREAD SIZE | 1.625 INCHES |
| FIRST INTAKE THREAD QUANTITY PER INCH | 12 |
| FIRST INTAKE THREAD CLASS | 3B |
| FIRST INTAKE THREAD DIRECTION | RIGHT-HAND |
| FIRST DISCHARGE CONNECTION RELATIONSHIP TO INTAKE CONNECTION | IDENTICAL TO FIRST INTAKE CONNECTION |
| MOUNTING TYPE | UNTHREADED HOLE HEAD |
| MOUNTING HOLE QUANTITY | 2 |
| DISTANCE BETWEEN MOUNTING HOLE CENTERS | 4.000 INCHES NOMINAL |
| MOUNTING HOLE DIAMETER | 0.562 INCHES NOMINAL |
| FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW |
| FEATURES PROVIDED | AIR BLEED VALVE AND |
| BY-PASS VALVE AND |
| DIFFERENTIAL PRESSURE INDICATOR AND |
| DRAIN PLUG |
| SPECIAL FEATURES | INVERTED DESIGN,HEAD ON BOTTOM; CONTAINER WITH THREADED STEEL END CAP; ELECTRIC SWITCH DIRT ALARM |