| DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.750 INCHES MINIMUM AND 1.880 INCHES MAXIMUM |
| DISTANCE FROM BOTTOM OF BODY TO CENTER OF INLET | 8.190 INCHES NOMINAL |
| DROP PRESSURE | ERR-060 |
| BODY HEIGHT | 9.710 INCHES NOMINAL |
| BODY LENGTH | 5.250 INCHES NOMINAL |
| BODY WIDTH | 2.620 INCHES NOMINAL |
| DESIGN TYPE | REUSABLE |
| FEATURES PROVIDED | BY-PASS VALVE |
| FILTERING ELEMENT QUANTITY | 1 |
| FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE |
| FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW |
| FILTRATION RATING IN MICRONS | 10.0 NOMINAL |
| FIRST DISCHARGE CONNECTION RELATIONSHIP TO INTAKE CONNECTION | IDENTICAL TO FIRST INTAKE CONNECTION |
| FIRST INTAKE CONNECTION TYPE | THREADED INTERNAL TUBE HEAD SIDE |
| FIRST INTAKE NOMINAL THREAD SIZE | 1.625 INCHES |
| FIRST INTAKE THREAD CLASS | 2B |
| FIRST INTAKE THREAD DIRECTION | RIGHT-HAND |
| FIRST INTAKE THREAD QUANTITY PER INCH | 12 |
| FIRST INTAKE THREAD SERIES DESIGNATOR | UN |
| OPERATING PRESSURE | 150.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM LOCATION NOT OTHERWISE SPECIFIED |
| MATERIAL | ALUMINUM BODY |
| MATERIAL | PAPER FILTERING MEDIUM |
| MATERIAL | RUBBER BUNA N SEAL |
| MATERIAL | STEEL CONTAINER/CARTRIDGE |
| MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON |
| MOUNTING FACILITY THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| MOUNTING FACILITY NOMINAL THREAD SIZE | 0.312 INCHES |
| MOUNTING HOLE QUANTITY | 6 |
| MOUNTING TYPE | THREADED HOLE HEAD |
| SPECIAL FEATURES | PRESSURE INDICATOR GAGE LOCATED IN PORT 3 ON HEAD; SPIN-ON ELEMENT; 3.0 PSI BY-PASS SETTING |
| STYLE DESIGNATOR | TEE TYPE (HYDRAULIC) |
| TEMP RATING | -65.0 FAHRENHEIT MINIMUM AND 250.0 FAHRENHEIT MAXIMUM |