|
|
|
National Stock Number:
4330-01-263-3209
Federal Supply Class:
4330
National Item Identification Number:
012633209
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 12633 | 16868 | GELMAN SCIENCES INC |
|
Techincal Specification:
| STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) | | BODY DIAMETER | 2.600 INCHES NOMINAL | | BODY OVERALL LENGTH | 9.800 INCHES NOMINAL | | MATERIAL | PLASTIC POLYPROPYLENE CONTAINER/CARTRIDGE | | GLASS FIBER FILTERING MEDIUM | | RUBBER BUNA N AND | | RUBBER SYNTHETIC SEAL | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | DESIGN TYPE | NONREUSABLE | | FILTRATION RATING IN MICRONS | 1.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | TEMP RATING | 190.0 DEG FAHRENHEIT MAXIMUM | | DIFFERENTIAL PRESSURE | 80.0 POUNDS PER SQUARE INCH | | FILTERING SURFACE AREA | 3.5 SQUARE FEET | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | SPECIAL FEATURES | PHENYLENE OXIDE END CAPS |
|
|