|
|
|
National Stock Number:
4330-01-172-7603
Federal Supply Class:
4330
National Item Identification Number:
011727603
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 0060-0-005-Y | 59793 | HYDAC CORP | | 0060D005Y | 59793 | HYDAC CORP | | 0060D010B3HC | 59793 | HYDAC CORP | | 0060D010BH | 59793 | HYDAC CORP | | 0060D010BH4HC | 59793 | HYDAC CORP | | 31515333 | F3255 | NICOLAS INDUSTRIE | | SE014F10B | 53790 | STAUFF CORP |
|
Techincal Specification:
| STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) | | BODY DIAMETER | 1.700 INCHES NOMINAL | | BODY INSIDE DIAMETER | 0.484 INCHES NOMINAL | | BODY OVERALL LENGTH | 4.000 INCHES NOMINAL | | MATERIAL | FIBER SYNTHETIC FILTERING MEDIUM | | RUBBER BUNA N SEAL | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | DESIGN TYPE | NONREUSABLE | | FILTRATION RATING IN MICRONS | 5.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | TEMP RATING | 14.0 DEG FAHRENHEIT MINIMUM AND | | 212.0 DEG FAHRENHEIT MAXIMUM | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | SPECIAL FEATURES | CARTRIDGE-TYPE; BET AMICRON |
|
|