|
|
|
National Stock Number:
4330-01-132-1654
Federal Supply Class:
4330
National Item Identification Number:
011321654
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| K23001 | 02249 | PARKER HANNIFIN CORPORATION DBA GRESEN HYDRAULICS DIV HYDRAULIC VALVE DIVISION | | K23001 | 05779 | PARKER-HANNIFIN CORPORATION |
|
Techincal Specification:
| STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | BODY DIAMETER | 4.500 INCHES NOMINAL | | BODY INSIDE DIAMETER | 1.530 INCHES NOMINAL | | BODY OVERALL LENGTH | 9.750 INCHES NOMINAL | | MATERIAL | NICKEL ALLOY FILTERING MEDIUM | | RUBBER BUNA N SEAL | | FILTERING MEDIA DESIGN | MESH SINGLE FILTERING MEDIA RESPONSE | | MESH SIZE | 100.0 | | WIRE DIAMETER | 0.0045 INCHES NOMINAL | | DESIGN TYPE | REUSABLE | | FLOW DIRECTION | OUTSIDE IN | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND | | 250.0 DEG FAHRENHEIT MAXIMUM | | FILTERING SURFACE AREA | 1.39 SQUARE FEET | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | SPECIAL FEATURES | W/ 2 ELEMENT SEALS,1 ELEMENT HOUSING SEAL,1 CENTER POST GASKET; 165 MICRONS NOM |
|
|