|
|
|
National Stock Number:
4330-01-108-2589
Federal Supply Class:
4330
National Item Identification Number:
011082589
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 10320-6 ITEM 6 | 01496 | AIR DRY CO OF AMERICA, LLC | | 10320-6 ITEM 6 | 99447 | COOPER INTERCONNECT, INC. | | 6120-20 | 01496 | AIR DRY CO OF AMERICA, LLC | | 6120-20/1 | 01496 | AIR DRY CO OF AMERICA, LLC | | 6120-34 | 01496 | AIR DRY CO OF AMERICA, LLC | | 6120-20/1 | 99447 | COOPER INTERCONNECT, INC. | | CS-4330-SV-0723 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | AC6281F12SUZ | 17238 | PALL CORPORATION | | AC6281F12SUZ | 18350 | PALL AEROPOWER CORPORATION | | AC6281F12SUZ | 60047 | PALL AEROPOWER CORP SUB OF PALL CORP MECTRON INDUSTRIES DIV | | AC-6281F-12SUH | 60047 | PALL AEROPOWER CORP SUB OF PALL CORP MECTRON INDUSTRIES DIV |
|
Techincal Specification:
| DESIGN TYPE | NONREUSABLE | | BODY DIAMETER | 1.735 INCHES MINIMUM AND 1.781 INCHES MAXIMUM | | BODY INSIDE DIAMETER | 1.000 INCHES MINIMUM AND 1.032 INCHES MAXIMUM | | BODY OVERALL LENGTH | 4.437 INCHES MINIMUM AND 4.500 INCHES MAXIMUM | | FILTERING MEDIA DESIGN | PLEATED 1ST FILTERING MEDIA RESPONSE | | FILTERING MEDIA DESIGN | SPUN 2ND FILTERING MEDIA RESPONSE | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW | | FILTRATION RATING IN MICRONS | 10.0 NOMINAL | | FLOW DIRECTION | INSIDE OUT | | MATERIAL | CELLULOSE FILTERING MEDIUM AND GLASS FIBER FILTERING MEDIUM | | MATERIAL | METAL SCREENING | | MATERIAL | RUBBER SYNTHETIC SEAL | | III STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | ANY ACCEPTABLE | | SPECIAL FEATURES | PERFORATED METAL TUBE W/0.040IN.HOLES;SCREEN SUPPORTED; METAL END CAPS | | TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND 250.0 DEG FAHRENHEIT MAXIMUM |
|
|