|
|
|
National Stock Number:
4330-01-094-8761
Federal Supply Class:
4330
National Item Identification Number:
010948761
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 041210-M2 | 87405 | FACET (OKLAHOMA) LLC | | 041210-M2 | 90005 | PUROLATOR FACET INC. | | CDF-210 | 13573 | PARKER HANNIFIN CORP | | CDF-210E | 13573 | PARKER HANNIFIN CORP | | 1650PL0143301 | 9009H | INSPEKTORAT WSPARCIA SIL ZBROJNYCH | | 41210 | A3649 | FACET ITALIANA SPA | | GNG-210 | 0BRZ7 | SEQUOYAH INDUSTRIES | | MIL-M-81380 | 81349 | MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | | GNG-210 | 87405 | FACET (OKLAHOMA) LLC |
|
Techincal Specification:
| DESIGN TYPE | NONREUSABLE | | BODY DIAMETER | 1.688 INCHES MINIMUM AND 1.812 INCHES MAXIMUM | | BODY INSIDE DIAMETER | 0.875 INCHES MINIMUM AND 1.125 INCHES MAXIMUM | | BODY OVERALL LENGTH | 10.751 INCHES MINIMUM AND 10.875 INCHES MAXIMUM | | FILTERING MEDIA DESIGN | LAYERED 1ST FILTERING MEDIA RESPONSE | | FILTRATION RATING IN MICRONS | 2.0 ABSOLUTE | | FLOW DIRECTION | OUTSIDE IN | | MATERIAL | ALUMINUM ALLOY CONTAINER/CARTRIDGE AND NYLON CONTAINER/CARTRIDGE | | MATERIAL | CELLULOSE FILTERING MEDIUM AND PLASTIC FILTERING MEDIUM | | MATERIAL | RUBBER BUNA N SEAL | | III STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) | | PROPRIETARY CHARACTERISTICS | PACS | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | SPECIAL FEATURES | 150.0PSI; END CAP CLOSED ON BOTTOM END | | TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND 160.0 DEG FAHRENHEIT MAXIMUM |
|
|