|
|
|
National Stock Number:
4330-01-016-6078
Federal Supply Class:
4330
National Item Identification Number:
010166078
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 1559924 | 10000 | MANEY AIRCRAFT, INC. | | 1559924 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | 159924 10001 | 16236 | DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) | | 586A-25E | 59165 | NORMAN FILTER COMPANY, L.L.C. | | 586A-25PE | 59165 | NORMAN FILTER COMPANY, L.L.C. | | MPF-586A-25PE | 59165 | NORMAN FILTER COMPANY, L.L.C. | | U-10224 | 59165 | NORMAN FILTER COMPANY, L.L.C. |
|
Techincal Specification:
| STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | BODY DIAMETER | 1.985 INCHES MINIMUM AND | | 2.031 INCHES MAXIMUM | | BODY INSIDE DIAMETER | 1.251 INCHES MINIMUM AND | | 1.255 INCHES MAXIMUM | | BODY OVERALL LENGTH | 7.062 INCHES NOMINAL | | MATERIAL | CELLULOSE FILTERING MEDIUM | | PLASTIC SEAL | | FILTERING MEDIA DESIGN | PLEATED SINGLE FILTERING MEDIA RESPONSE | | DESIGN TYPE | NONREUSABLE | | FILTRATION RATING IN MICRONS | 25.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MEDIA FOR WHICH DESIGNED | FUEL/OIL, HYDROCARBON | | TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND | | 300.0 DEG FAHRENHEIT MAXIMUM | | DIFFERENTIAL PRESSURE | 150.0 POUNDS PER SQUARE INCH | | SPECIAL FEATURES | FOR SKYDROL OR PYDRAUL 150; METAL END CAPS | | SPEC/STD CONTROLLING DATA | | | MANUFACTURERS CODE | 16236 | | MFR SOURCE CONTROLLING REFERENCE | 159924 10001 |
|
|