|
|
|
National Stock Number:
4330-00-908-0210
Federal Supply Class:
4330
National Item Identification Number:
009080210
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 901060 | 05779 | PARKER-HANNIFIN CORPORATION | | MN1060C | 05779 | PARKER-HANNIFIN CORPORATION |
|
Techincal Specification:
| STYLE DESIGNATOR | CYLINDRICAL W/ CONTAINER (RIGID) | | BODY DIAMETER | 4.688 INCHES MINIMUM AND | | 4.719 INCHES MAXIMUM | | BODY INSIDE DIAMETER | 2.969 INCHES MINIMUM AND | | 2.999 INCHES MAXIMUM | | BODY OVERALL LENGTH | 5.594 INCHES MINIMUM AND | | 5.625 INCHES MAXIMUM | | MATERIAL | STEEL CORROSION RESISTING AND | | NICKEL ALLOY FILTERING MEDIUM | | FILTERING MEDIA DESIGN | MESH SINGLE FILTERING MEDIA RESPONSE | | DESIGN TYPE | REUSABLE | | FILTRATION RATING IN MICRONS | 30.0 NOMINAL | | FLOW DIRECTION | OUTSIDE IN | | MEDIA FOR WHICH DESIGNED | ANY ACCEPTABLE | | TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND | | 125.0 DEG FAHRENHEIT MAXIMUM | | FILTERING SYSTEM FOR WHICH DESIGNED | FULL FLOW |
|
|