2590-00-894-3942 CONTROL ASSEMBLY,PUSH-PULL Index 5905-00-894-3945 RESISTOR,FIXED,WIRE WOUND,NONIND

National Stock Number:
4330-00-894-3943

Federal Supply Class:
4330

National Item Identification Number:
008943943

Description:
FILTER ELEMENT,FLUID

Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.


Manufacturer Information:
200646-100736FALLS FILTRATION TECHNOLOGIES, INC.
200646-1700736FALLS FILTRATION TECHNOLOGIES, INC.
200742-900736FALLS FILTRATION TECHNOLOGIES, INC.
C19642-2300736FALLS FILTRATION TECHNOLOGIES, INC.
FLR2840AT62SIEMENS ENERGY, INC.
FLR27993236DRESSER-RAND CO WORTHINGTON COMPRESSOR OPN A JOINT VENTURE
FLR28459379ATLAS COPCO HOLYOKE INC
FLR284830Q4CURTISS-WRIGHT ELECTRO-MECHANICAL CORPORATION
FLR2848FGX3CURTISS-WRIGHT ELECTRO-MECHANICAL CORP
FLR28493234WORTHINGTON COMPRESSORS INC AIR POWER AND CONSTRUCTION EQUIP DIV
FLR28493236DRESSER-RAND CO WORTHINGTON COMPRESSOR OPN A JOINT VENTURE


Techincal Specification:
DESIGN TYPENONREUSABLE
BODY DIAMETER10.880 INCHES NOMINAL
BODY INSIDE DIAMETER9.440 INCHES NOMINAL
BODY OVERALL LENGTH23.690 INCHES NOMINAL
FLOW DIRECTIONOUTSIDE IN
MATERIALMETAL CONTAINER/CARTRIDGE
III STYLE DESIGNATORCYLINDRICAL W/ CONTAINER (RIGID)
PROPRIETARY CHARACTERISTICSPACS
MEDIA FOR WHICH DESIGNEDAIR


Click here to Register for Free 30-day Trial