|
|
|
National Stock Number:
4330-00-763-1267
Federal Supply Class:
4330
National Item Identification Number:
007631267
Description:
FILTER ELEMENT,FLUID
Detail:
A replaceable device designed to remove solid particles from fluids ranging in density from heavy liquids to gases. The removal of particles is accomplished by porous material (metallic or non-metallic), stacked disks, wound wire, or the like, constructed so the fluid can flow through the device while the solid particles are retained. It may be designed to fit into a FILTER, FLUID (or similar cavity), or it may have an integral outer casing and mounting facilities and be designed to connect directly to an engine, compressor, or the like. The degree of removal of particles must be nominally rated at less than 50 microns or absolutely rated at less than 75 microns. Excludes FILTER ELEMENT, AIR CONDITIONING. See also STRAINER ELEMENT, SEDIMENT.
|
Manufacturer Information:
| 2419974 | 10001 | NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER | | AC3572E10D40 | 18350 | PALL AEROPOWER CORPORATION | | AC3572E10D40 | C0202 | PALL GMBH |
|
Techincal Specification:
| STYLE DESIGNATOR | CYLINDRICAL W/OUT CONTAINER | | BODY DIAMETER | 1.000 INCHES NOMINAL | | BODY INSIDE DIAMETER | 0.685 INCHES MINIMUM AND | | 0.700 INCHES MAXIMUM | | BODY OVERALL LENGTH | 5.188 INCHES NOMINAL | | MATERIAL | METAL FILTERING MEDIUM | | FILTERING MEDIA DESIGN | SINTERED SINGLE FILTERING MEDIA RESPONSE | | DESIGN TYPE | REUSABLE | | FILTRATION RATING IN MICRONS | 55.0 ABSOLUTE | | FLOW DIRECTION | OUTSIDE IN | | MEDIA FOR WHICH DESIGNED | ANY ACCEPTABLE | | TEMP RATING | -65.0 DEG FAHRENHEIT MINIMUM AND | | 250.0 DEG FAHRENHEIT MAXIMUM | | SPECIAL FEATURES | TOP END THREADED,7/8-14 UNF 2A,1.250 IN. HEX WRENCHING FLATS,BOTTOM END CLOSED |
|
|